Whether you are working in the heat of the summer or the bitter cold of winter, you don’t want the anchoring adhesive you are using to slow you down. Acrylic-Tie is specially formulated to dispense easily and cure within a wide temperature range, meaning Acrylic-Tie works where you do. And since it is an adhesive anchor, AT gives you higher loads than typical expansion anchors without the expansion forces.

Uses:

• Threaded rod anchoring
• Rebar doweling
• Pick-proof sealant around doors, windows and fixture

Features:

• Dispenses easily at almost any temperature, even below freezing with no cartridge warming.
• Cures down to -18°C.
• Fast cure (1 hour) at temperatures above 16°C.
• High strength for structural applications.
• No load reduction for wet or damp holes.
• Great for applications with close spacing or edge distance.
• Complete test data and code reports: ICC-ES Evaluation Report # ER-5791.

topTechnical Information

AT Acrylic-Tie® is a two component, high solids, 10:1 ratio acrylic-based adhesive for use as a high strength, anchor-grouting material. Formulated for use in all types of weather, AT is designed to dispense easily and cure at temperatures down to 0°F. Resin and initiator are dispensed and mixed simultaneously through the mixing nozzle. AT meets the physical requirements of ASTM C881, Type I & IV, Grade 3, Classes A, B & C, except Acrylic-Tie is a non-epoxy product formulated for fast cure time.

AT Acrylic-Tie Cartridge Systems:

Cure Schedule: